Radyne Single Wire Induction Heating Module

Radyne has developed a series of induction heating modules, designed to heat many types of single strand wire during manufacture.

Induction power supplies are available ranging from 40kW to 400kW at operating frequencies from 3kHz to 3.9MHz, depending on the application. Similarly, induction coils are available in lengths ranging from 2" to 80", as required.

There are many applications calling for single wire induction heating and these include the following:-

•    Hot Drawing
•    Conform
•    Cladding
•    Tempering and Austempering
•    Pre-heating.
•    Low Relaxation of PSC Wire or Cable.

A typical single wire heating module will consist of a Radyne 400kW / 10kHz TFN series induction power unit supplying power to a 4000mm coil. The above unit is supplied complete with a control console together with closed-loop temperature control and a water re-circulating cooling system.

Call us at 1-800-236-8360 in the U.S. or 1-414-481-8360 from anywhere else in the world
email us at sales@radyne.com