|
Innovative,
State of the Art Induction Systems for |
|
|
| Solutions | Model TF IGBT Induction Power SupplyThe powerful combination of advanced engineering, attention to detail and 50 years experience in induction heating has helped Radyne become world leaders in the production of medium and high-frequency induction power supplies. The new TF range from Radyne offers the user a selection of power and frequency combinations suitable for most induction heating applications. The availability of the latest IGBT power semi-conductors with faster switching characteristics has permitted Radyne to produce a new induction power supply design ideally suited to induction heating applications between 3 to 50 kHz. |
|
| Products | ||
| Induction Power Supplies | ||
| Scanning Systems | ||
| Power Integrated Pop Ups | ||
| Brazing Systems | ||
| Wire, Rod & Cable Systems | ||
| Pipe Coating Systems | ||
| Technology | ||
| Service | ||
| Certified/Pre-Owned | ||
| About Us | ||
| Contact Us | ||
| sales@radyne.com | ||
| Performance The performance of the TF series tuned-output circuit is easily matched to the work load by selecting the appropriate output tapping and amount of capacitance built into the power supply to suit the required induction coil configuration. This optimization of performance allows the TF to deliver full power and maximum efficiency operating at, or close to, the natural resonance of the external working circuit |
| Physical Data (H x W x D in inches) | |||||
| 61 x 40 x 24 | 76 x 48 x 39 | 76 x 71 x 39 | 76 x 84 x 39 | 77 x 106 x 49 | 77 x 129 x 49 |
| Type TF Model Numbers | |||||
| 75TF3 | 300TF3 | 750TF3 | 800TF10 | 1000TF3 | 1500TF3 |
| 150TF3 | 500TF3 | 600TF10 | 520TF30 | 1200TF10 | 2000TF3 |
| 250TF3 | 240TF10 | 390TF30 | 400TFP50 | 800TF30 | 1600TF10 |
| 60TF10 | 400TF10 | 300TFP50 | 1040TF30 | ||
| 120TF10 | 160TF30 | ||||
| 200TF10 | 260TF30 | ||||
| 40TF30 | 200TF50 | ||||
| 80TF30 | |||||
| 130TF30 | |||||
| 50TF50 | |||||
| 100TFP50 | |||||
| 150TFP50 | |||||
| Operation High impedance units feature an internal matching transformer and both high and low impedance units have an adjustable capacitor bank for load coil matching. Operation can be by direct manual controls on the unit, from a remote control box or PLC. A built-in timer provides an adjustable range of heat cycle times. Control During converter operation, panel mounted analog meters continuously display actual power (kW), frequency (kHz), output current (I) and voltage (V). Critical running parameters are continually monitored and, if fault conditions are detected, the converter is automatically shut down. Status indication and matching assistance is provided by front panel LEDs. These signals are readily available for interface with an external host system to provide diagnostic facilities. Features • Flexible operation over a wide range of heating loads • Latest IGBT technology and lower device count • Simplified power design and fully self-protecting • Simplified water cooling design • Front panel control and status indicators • Small, light, and compact • Electric – 480 V, 3-phase, 60 Hz Other ratings available. Benefits • Easy tuning and setup • High reliability, reduced spare part requirement • Operating conversion efficiency up to 95% • Reduced water cooling flow, accepts higher inlet temperatures • Easy to operate, install and start up Applications The TF range offers improved reliability and flexible application to the widest range of induction heating duties from surface hardening through to heating.The compact design of this new range ensures that it can be easily installed into process lines or manu-facturing cells, or alternatively, the converter can be integrated into the construction of a free-standing induction heating machine. |
| Call us
at 1-800-236-8360 in the U.S. or
1-414-481-8360 from anywhere else in the world Copyright 2007 Radyne Corporation Legal Agreement |
 |
 |