| Solutions |
| Radyne
has a variety of systems including power supplies and other equipment
for Fiber manufacturing. Fiber is manufactured by heating a
susceptor to an elevated temperature and sustaining the temperature of
a large diameter bar/rod of Quartz or other similar material used to
make the fibers. The heat causes a section to slowly pull down to
manufacture the proper diameter fiber required. This larger starter end
is connected to a puller and the fiber is "drawn" through the induction
heat zone at a controlled rate to produce the required diameter.
Call Radyne for your Fiber Optic manufacturing line needs.
Call
us at 1-800-236-8360 in the U.S. or
1-414-481-8360 from anywhere else in the world. |
